Office Add: Room 1610. Gold Index A,Xinhua Road68#,Shijiazhuang,Hebei,China
Plant Add: Lingda Road 7#,Douyu Industrial Area,Luancheng Country,Shijiazhuang, Hebei,China
Warehouse: Zhengda Road, Luancheng Contry, Shijiazhuang, Hebei, China.
What are T/C70/30 Stretchable Herringbone Pocketing fabrics
After the fibers are worked with flax, T/C70/30 Stretchable Herringbone Pocketing fabrics are bundled into small bundles to hold retting degumming. The temperature of the warm water for retting the hemp should be controlled between 28 and 32 °C. After 100 hours of control, take it out, build the hemp pole into an umbrella shape, and dry it in the open. Rain and dew retting is the process of laying the harvested hemp stems on the grass or flax ground, soaking in rain and dew, and using mold fermentation to retting.
T/C70/30 Stretchable Herringbone Pocketing fabricsde Flax is the main material of the hemp textile industry, its fiber is strong, soft, and has good glory. Flax fiber is strong, not easy to fester in water, and has waterproof infection. Others are anti-collision, high temperature resistance, fast heat dissipation, low dust collection rate, not easy to tear, not easy to burn, no static electricity, high acid and alkali resistance. The advantage is that it is the preferred textile raw material for green and environmental protection, and is known as the "queen" of natural fibers.
The measurement of T/C70/30 Stretchable Herringbone Pocketing fabrics should be carried out on the platform, pay attention to the flat fabric, and carry out the weft and skew test without accidental tension, so as to avoid the system error caused by hanging measurement on the cloth inspection car. For the new cloth inspection vehicle, the length measuring equipment is often pressed on the cloth surface alone to be dragged and rolled, and the fabric is blocked and swelled at the contact point, and it is easy to form a weft bow. Although it is slightly better to use the spindle rolling to measure the length on some traditional cloth inspection machines, the cloth sag will form a natural weft bow due to the sagging weight. The difference between the two is between 0.8% and 1.5% in the test of the flattening method and the hanging test of the cloth inspection machine.